BTBLZ - WATER BASED EPOXY
- MSDS: BTBLZ
- Manufacturer: RUST OLEUM CORP
- Product Name: WATER BASED EPOXY
- National Stock Number: 8010-00F032987
Product Identification
Product ID:WATER BASED EPOXY
MSDS Date:02/11/1993
FSC:8010
NIIN:00F032987
MSDS Number: BTBLZ
Responsible Party
VERNON HILLS, IL 60061-1583
US
Emergency Phone: 708-367-7700
Info Phone: 708-367-7700
Cage: 08882
Contractor
Telephone: 847-367-7700
Cage: 08882
Ingredients
EPOXY RESIN
Fraction By Weight: 20-30%
ETHYLENE GLYCOL PROPYL ETHER, EKTASOLVE EP
CAS: 2807-30-9
RTECS: KM2800000
Fraction By Weight: 5-10%
SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 2-3%
OSHA PEL 100 PPM
10.1-11.4 LBS
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL, AFFECT BRAIN &
NERVOUS SYSTEM W/DIZZINESS, HEADACHE OR NAUSEA. LEAD TO STAGGERING
GAIT, CONFUSIION, UNCONSCIOUSNESS, COMA. NOSE & THROAT IRRITATION.
INGESTION: GASTROINTESTINAL IR RITATION, NAUSEA, VOMITING &
DIARRHEA. EYES: IRRITATION. SKIN: IRRITATION, REACTION W/ RASH,
HIVES, ITCHING, SWELLING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPORTS HAVE ASOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. CONTAINS SOLVENTS WHICH MAY CAUSE
INJURY TO BONE MARROW AND BLOOD CELLS WITH REPEATED OVEREXPOSURE.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE, RESTORE BREATHING. EYES:
FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH AFFECTED AREA W/SOAP & WATER. INGESTION: DILUTE STOMACH
CONTENTS W/2 GLA SSES OF WATER & INDUCE VOMITING BY EITHER GIVING
IPECAC SYRUP/PLACING 2 FINGERS AT BACK OF THROAT. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. OBTAIN MEDICAL
ATTENTION IN ALL CASES
Fire Fighting
Flash Point Method:SCC
Flash Point:141F
Extinguishing Media:NFPA CLASS B EXTINGUISHERS, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT W/SCBA. WATER SPRAY
MAY BE INFFECTIVE, BUT MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS, & OPEN FLAME. CLOSED
CONTAINERS MAY EXPLODS WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE AREA
& REMOVE W/INERT ABSORBECT & NONSPARKING TOOLS. WASJ SPILL AREA
W/WATER & FLUSH TO SEWER SERVICED BY WASTEWATER TREATMENT FACILITY.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:EMPTY CONTAINERS MAY BE HAZARDOUS.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED CHEMICAL CARTRIDGE RESPIRATOR
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY & ORGANIC VAPORS
DURING SPRAY APPLICATION. IN CONFINED AREA: USE NIOSH APPROVED
SUPPLIED-AIR RESPIRATOR S OR HOODS
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN
VOLUME & PATTERN TO KEEP TLV,S BELOW LIMITS.
Protective Gloves:RECOMMEDED
Eye Protection:SAFETY EYEWEAR
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING & WASH BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212-350F
Vapor Density:>1
pH:7.8-9
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61-65
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:C0 & CO2
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.